Standard
the universal type for lots of applications
loops are sewn into/with vertical seams
integrated loops are sewn standard on the inside of the fibc, on request also the on outside
single trip or single use available swl from 500 kg up to 2000 kg, sf 5:1- efibca 005
standard duty available swl from 500, 1000, 1250 & 15 00 kg , sf 6:1 – efibca 004
also available with sf 8:1 swl 1000 kg
suitable for un-certification packaging group ii & ill, hi, 2, 3, 4
our quality unobtainable with other suppliers
Cross Corner
evaluated type for special handling
loops are sewn onto the body fabric
preferred with circular woven fabric (& reinforcement), also available with fabric patches.
swl from 500 kg up to 1500 kg, sf 5:1 – efibca 005
standard duty available for swl 500,1000 & 1250 kg, sf 6:1 ? efibca 004
also available with sf 8:1 swl 1000 kg
most suitable for un-certification packaging group 11 & ill, hi, 2,3,4 (circular construction)
Tunnel
bottleneck type for 1 -point & 4-point lifting
loops are sewn into fabric pouch of vertical seams and then zig-zag fixed
good stability and stacking characteristics
swl from 500 kg up to 1500 kg sf 5:1
standard duty available for swl 500,1000 &1250 kg, sf 6:1
Lift
type for forklift handling
loops are sewn as a reinforcement of the tunnels
swl from 500 kg up to 2000 kg sf 5:1
standard duty available for swl 500,1000,1250 &1500 kg, sf 6:1
also available with sf 8:1 swl 1000 kg
BULK BAG Quadro (Baffle Bag )
baffles are preventing that the bag will get a round shape (*see our page “dimensions” ) an inner frame keeps the filled fibc in a more square or rectangular shape, so it can be better handled and stacked, as it doesn’t protrude from pallets and has more stability
baffle bag can be designed to the standard pallet sizes (see back page) or to your needs
the second advantage of baffle bag is that the unused volume of loading or storing space is diminished from about 30 % to about 7 %
baffle bag guarantees efficient use of loading space and optimizes your transport
this design is even more economic for your packaging expenses than standard fibcs due to the savings in packaging materials ,transport costs.
- available qualites
- coated
- coated & dust proof seams
- uncoated
- uncoated & q-liner ( see page )
Potato Bag
for products, which require a good ventilation such as potatos, onions etc.
a new and high quallty product : full ventilated fibc, (certified under efibca – norm 004 & 005)
all filling and discharging facilities
swl 500 -1500 kg, sf 5:1, swl 1000 kg, sf 6:1 applicable to our other data sheets
preferred with top flap or filling sklrt
discharging spout of 45 x 50 cm height from standard cloth.
all materials of potato bag are yellow with blue strlpes, this garantees an excellent package of your products and a better uv-stabilization and higher breaking strength.
flexible intermediate bulk containers
Open Top
- easy filling for manual filling or big filling materials
- for construction material such as stones or sand which need no extraordinary protection
Filling Slot
- top lid with a slot to allow a filling tube insertion into the bag
- no closing or tying on top
- ideal for bags with innerliners
Filling skirt
- the universal system, it can be folded outside for easy manual filling
- attachable to nearly every filling station and diameter
Filling spout
- most used filling option standard diameter: 0 35 cm other 25 – 65 cm
- standard height 50 cm other possible on request
- extra inner ties possible for binding of liner
Capuchon skirt
- draw string closes top
- round piece remains inside to close round hole in the middle
Conical top
- special filling feature
- available with top spout or skirt with dimensions as on this sheets
- height available to your demands
Draw string skirt
- easy closing of top only with pulling of the tie strings
- not recommended on coated bags
Capuchon Spout
- external draw string protects internal spout
- easy closing by draw string
- top flat after filling
flat bottom
| ||
discharge spout
| ||
lock systems
| ||
conical base
| ||
protection flap
| ||
capuchon spout
| ||
“petal star” closure
| ||
discharging skirt
|
base our standard inner dimensions (between seams) are: 76 X 76 cm 87 X 87 cm 91 X 91 cm 96 X 96 cm 106 X 106 cm or a combination of the above all other base dimensions are also available | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
height inner dimensions (between seams) for the height we deliver to your request, please take the information on this back page into consideration. the dimensions of your best fibcs are depending on your bottling plant facilities, filling product, packaging unit (per kg) your stock options, means of transport etc. please contact us, we will design exactly the fibc you require. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
VOLUME the table below (versions for europe and usa) is valid for our types: standard ,cross corner,lift,potato bag. (not valid for tunnel- type and, of course: baffle bag). | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
after filling the fibc remains in a square or rectangular shape,dimensions after filling are designed to the most common palette sizes which are specified below the table different filling products may influence the dimensions of the filled baffle bag the required volume per kg or the required kg per liters you may calculate over the bulk density of your products, or conact us we will assist you. warning: due to stability risks, the height should not exceed the relation of 2:1 +10 % regarding its base width! |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
the data in the table below is for Baffle Bag: Q BAG (QUADRO) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
attached at the bottom or side of the bulk bag or at any place to your request |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
diameters to each base are specified below the table | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
the diameter may differ due to different filling products. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
important are inner dimensions the required volume per kg or the required kg per liters you may calculate over the bulk density of your products or contact us we will assist you |
After filling the bag takes on a rounded shape with the exception of type Quadro big Abul
The diameter of each base after filling of the bag bottom are specified in the table
The diameter may, however, be different depending on the product loading, the diameter of the table is indicative rather one amino.
The most important are the internal dimensions required by the customer
Bag volume can be calculated depending on the product density to be incarcat.Raficon Trade can provide the necessary assistance to make this decision. WARNING !
Due to the risks to the stability of the bag height should not exceed the normal ratio of crude of 2: 1 ratio between height and base diameter!
VOLUME
volume in the table below refers to all types of bag-type bags less than Q-BAG (Quadro) of which the volume is calculated in an additional table.
The table below is valid for the type Baffle bag Bag:
Q BAG (Quadro)
After filling the bag takes on a rounded shape with the exception of type Quadro big Abul
The diameter of each base after filling of the bag bottom are specified in the table
The diameter may, however, be different depending on the product loading, the diameter of the table is indicative rather one amino.
The most important are the internal dimensions required by the customer
Bag volume can be calculated depending on the product density to be incarcat.Raficon Trade can provide the necessary assistance to make this decision WARNING
Due to the risks to the stability of the bag height should not exceed the normal ratio of crude of 2: 1 + 10% of the height and diameter of the base!
Volume Liters | Base dimensions cm | ||
105×105 | 90×110 | 66×110 | |
Height of Quadro | |||
400 | 34 | 37 | 50 |
500 | 42 | 47 | 63 |
600 | 50 | 56 | 75 |
700 | 58 | 65 | 88 |
800 | 67 | 74 | 100 |
900 | 75 | 84 | 113 |
1000 | 84 | 93 | 125 |
1100 | 92 | 102 | 138 |
1200 | 100 | 111 | 150 |
1300 | 108 | 120 | 163 |
1400 | 117 | 130 | 175 |
1500 | 125 | 139 | 188 |
1600 | 133 | 148 | 200 |
1700 | 142 | 157 | – |
1800 | 150 | 167 | – |
1900 | 158 | 176 | – |
2000 | 167 | 185 | – |
2100 | 175 | 195 | – |
2200 | 184 | 204 | – |
2300 | 192 | 213 | – |
2400 | 200 | 222 | – |
2500 | 208 | – | – |
2600 | 216 | – | – |
2700 | 225 | – | – |
2800 | – | – | – |
2900 | – | – | – |
Filled | 114×114(cm) | 100×120(cm) | 80×120(cm) |
Pallett | CP 3 | CP 1 | CP 2 |
rigid (“stiff”) loops
| ||
double loops
| ||
wear pads
| ||
extra loops
| ||
lower loops
| ||
diagonal loops
| ||
“stevedore” loops
| ||
loop-in- loop
|
dust proof
- prevents fine filling material from coming out of the bag and leaking
- prevents dust from polluting the filling products
- our standard: a dust proof band is sewn on two sides under safety stitch on body & bottom, on request bag can be be sewn 100% dust proof (also top seam)
- even filling under pressure can be executed easier
pe-innerliner
- the best protection against moisture
- excellent for hygroscopic materials
- bottom standard: welded (sealed) delivered inserted into outerbag or delivered apart
- available quality: 30 – 1000 cm circumference 70 – 200 microns standard color: transparent
- other colors available, gusset available
- all liners food quality (fda/bga)
- additional inner ties available for separate binding of the liner
- conductive (“anti-static”) also available
- about other liners as aluminium, evoh, hdpe or co-ex, we will advise you personally
“bottle neck”
- preshaped liner with preshaped filling and discharging spouts, according to the outer bag, standard diameter: 25 – 65 cm filling skirt and open top also available
- for special needs, difficult filling materials or for multiuse the liner can be manufactured with tabs (8 tabs in total) or flaps (4 flaps in total at each edge) so the inkofix is sewn with the vertical seams of the outer pp- bag, which eliminates any gluing.
- inkofix is even suitable for products which can not be handled with a liner, but the risks that the liner is slipping out is now eliminated
- all types are also available with conductive (“anti-static”) quality
“baffle bottle neck”
- designed for baffle bag with pe-liner
- preshaped liner with preshaped filling and discharging spouts possible, according to the outer bag standard diameter: 25 – 65 cm
- Fusta de incarcare si gura deschisa de asemenea disponibile fixate cu benzi de fixare ca orice inkofix
- filling skirt and open top also available – should be fitted with tabs or flaps as normal inkofix
- is also available with conductive (“anti-static”) quality.